CORE CUTTING
Core cutting is done to make provisional or permanent holes for the purposes of electrical wiring, plumbing, firefighting systems, rainwater outlets, heating, air-conditioning, and ventilation installations.
On brick walls, RCC walls, black stones, slabs, beams, columns, and water tanks, etc. core-cutting can be done.
On brick walls, RCC walls, black stones, slabs, beams, columns, and water tanks, etc. core-cutting can be done.
EPOXY INJECTION
Epoxy injection for Concrete Crack Repair in foundations, basements, beams, columns, slabs, walls and other concrete elements.
Injection of epoxy under pressure can be used to fill the cracks greater than or equal to 0.5mm opening.
Injection of epoxy under pressure can be used to fill the cracks greater than or equal to 0.5mm opening.
CONCRETE REPAIRS
Concrete repair is the process of fixing a hardened concrete surface that over time has lost the ability to hold the binding concrete materials together due to damage or environmental exposure.
Concrete repair is appropriate for cracks, physical impacts, chipped out surfaces or surface scaling.
Concrete repair is appropriate for cracks, physical impacts, chipped out surfaces or surface scaling.
CEMENT GROUTING &STAPLING
Cement Grouting is the injection under pressure of cement or grout to fill voids or fractures in the soil, rock unit or concrete structure.
It improves the stability of the rock formation; Provide pre-construction site improvement; Arrest foundation settlements, Repair fractures in machine bases; Rectify sinkhole problems; Lift and level slabs and foundations; Control soft-ground settlements in granular soils.
It improves the stability of the rock formation; Provide pre-construction site improvement; Arrest foundation settlements, Repair fractures in machine bases; Rectify sinkhole problems; Lift and level slabs and foundations; Control soft-ground settlements in granular soils.
SAND BLASTING
Sandblasting is the act of propelling very fine particles of an abrasive material at high velocity toward a surface in order to clean or etch it.it is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surface,shape a surface or remove surface contaminants
SLAB CUTTING
Larger openings are cut with a circular saw or a concrete chain saw with plunge cutting capabilities. Because a circular saw makes a longer cut on the top of the slab than on the bottom, small cores drilled at the corners can be used to help avoid over-cutting the opening when a circular saw is used.
